DRINKING SYSTEMS

Automatic Flushing-System


With the automatic flushing-system your drinking system is flushed by itself. With the LUBING controller LCW-8 you can flush up to 8 drinking lines separately. This system can be easily retrofitted into existing drinking systems.

Needed components:

With the LUBING controller (1) the duration and timing of flushing can be adjusted to individual needs. With that you can adjust the time required for a sufficient flushing depending on the length of the drinking lines and thus avoid water waste also during the flushing.

Each drinking line is flushed separately, but it is also possible to flush several drinking lines at the same time by clamping them to the same contact.

The solenoid valve of the flush kit (2) is also attached to the supply line of the pressure regulator. The entire unit between the water supply hose and the pressure regulator is delivered pre-assembled.

3. The flush breather unit art. 4255-00

For the automatic flushing a new breather unit (3) was developed. This is fastened to the end of the drinking line. The height of the water column is shown by a red ball in the riser. Through the drain kit (4) the flushing water is led to the drainpipe (5).


copyright 2012 | Lubing India | Design by Comarts Advertising